Does the network card work in full or half duplex mode?
The network interface cards have four operating modes as follows:
1. 10BASE-T HALF
2. 10BASE-T DUPLEX
3. 100BASE-T HALF
4. 100BASE-T DUPLEX
Products with OkiLAN 7100e, 7100e+, 7200e,
These modes are automatically negotiated with the switching hub. They cannot be changed manually.
Products with OkiLAN 8100e
The mode of operation can be configured via the printer's operator panel in the "Network" menu. By default, the printer is configured to automatically negotiate the mode of operation with the switching hub, however each of the modes listed above can be selected.