How do I enter Admin Setup mode?
30/01/2006
Admin Setup mode can be accessed by following the process described below.
1. From the Ready to Print state, press the Menu button until the Operator Panel changes as shown below.
2. Press the Menus button until the Operator Panel changes to the following.
3. Highlight Admin Setup in the previous display and press the Enter button until the Operator Panel changes to the following†.
4. Ensure that Yes is selected (by using *) in the previous display and press the Enter button until the Operator Panel changes through the following displays.
The printer is now in Admin Setup mode.
† The Operator Panels displayed in this article are specific to C9800/C9800GA/C9800MFP. The C9600 printer requests a password after pressing the Enter button in step 3. The default password is 0000. The password can be entered by pressing the Menu button and then the Enter button to input decimal values for each individual digit of the password. Pressing Enter after all the digits have been input causes the Operator Panel to change to the following (same as final display in step 4).
